Swag Off Road

Swag Off Road Tubing RollerHulk

Swag Off Road Tubing RollerHulk

Swag Off Road Tubing RollerHulk    Swag Off Road Tubing RollerHulk

SWAG Off Road Tubing Roller"HULK". The HULK is 100% machined, formed, manufactured in the USA. The HULK is capable of rolling material up to 2 X 2. Includes electronic digital display for downward travel, ideal for repeatable rolling. The HULK is 100% designed, machined, formed, manufactured & assembled in the USA.

We currently offer 76 different sizes of dies in the following configurations round tube, round pipe, square, as well as a full line of unique dies for doing flat bar on edge or square in a diamond profile. In addition we also offer a full line of Delrin dies in round tube, round pipe and square sizes.

Delrin dies are well suited for aluminum, copper, brass, and chrome finished where abrasion or scratches on the material are not acceptable. We use heat treated chromoly 4340 material for both the two outer non-drive roller axles and the center drive axle.

The center drive dies are fully keyed to the drive axle which ensures a smooth operation. The HULK is capable of rolling material up to 2" X 2". Most tubing rollers have two main issues, the material twisting as it is rolled and how difficult it is to make repeatable bends. We have addresses the first issue by implementing several key design features and playing special attention to the problem areas. The first is side to side slop in the two outer non-drive rollers. The length of the chromoly 4340 axle pins are machined down to +/.

003 thousands and the two adjustable shaft collars help keep the dies perfectly centered between the ¼ thick steel frame rails. The second is slop in the center drive roller yoke. There are several large radius roller out in the market that use a cast steel center yoke or a formed piece of steel to hold the center drive roller in place, however neither cast nor formed metal on a press brake are perfectly square and straight.

When the center yoke is not straight up and down or square side to side this causes the center drive die to contact the material you are rolling with uneven pressures and inconstant feed rates thus pulling your material to one side. We have addressed this by bolting together 3 pieces of ¾" thick steel that has been fully machined on all six sides to ensure a perfectly flat and square center yoke that is bolted together with (6) 5/16" counter sunk fasteners. The 2 ton bottle jack is physically bolted down to the center yoke assembly, this is done so the jack is placing even downward pressure and will not slip out of position when not is use. The third often over looked part of a tubing roller is repeatable rolling. We have addressed this by using the quality brand I-Gaging. A digital read out height gauge that measures downward travel. To use the DRO, you simple place your material in the roller then "zero" the height gauge, roll one piece of material to desired radius then record the location of the outer dies as well as the downward travel displayed on the digital read out.

From now on, as long as you have the same material and the dies in the same position with the same distance measured, you are able to get the same results time and time again. To ensure a smooth range of motion there are roller bearings installed on both the outer non-drive dies as well as the center drive die.

Their item #62203 is an easy simple add on that will take the cumbersome and tedious chore of rolling thick walled tubing and turn it into an almost completely hands off operation. With its textured then black powered coated steel frame, internally threaded aluminum spacers, green powder coated handle and countersunk stainless steel fasteners, this tubing roller is designed to look as good as it performs. It comes completely assembled ready use right out of the box.

The (4) 3/8" bottom mounting hole locations are 29" x 7.625 on center. The total foot print of the base plate is 30" x 8.625". Here at SWAG our tools and accessories are built for individuals looking for quality, 100% American made tools. Designed for those working with a limited budget and the need for custom metal fabrication. We strive to keep the needs of the everyday working man or Saturday shop hound at the forefront of our minds.

We believe in our Motto Doing Ordinary Extraordinary! Since our inception, we have a long history of service. Visit our website and see what we have to offer! ___________________________________ Available HULK Accessories: __________________________________.

SWAG Small Edge Rollers Dies. As it currently stands we have 66 different sizes of dies available.

We stock round tube dies, square dies, round pipe dies as well as a universal edge roller dies set for rolling flat bar on edge, cap rail dies and dies for rolling square on edge in a diamond shape. Each die set is 100% CNC machined out of 1018 steel for a precise fit. Every die set includes two outer driven rollers, one center drive roller. The SWAG machined 4130 cromoly premium drive axle is required and must be used with our dies.

One drive axle is compatible with every dies set we produce, hence you will only need one axle regardless of how many die sets you own. The drive axles as well as the center drive rollers are now broached and keyed.

Using the a key way will eliminate the hassle of constantly tightening the set screws and trying to keep the "wobble" out of the center drive roller. We also sell the tubing roller drive axle that is machined out of 4130 cromoly steel. The machined drive hub will need to be tack welded to the drive axle, as set screws and or key ways have a tendency to come loose under the high torque loads and the constant back and forth motion of the pipe threader. SWAG 2.5 Tube Dies. We offer alot of different electronics please feel free to check them up, thank you for your interest in our inventory. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. Thank you, hope you enjoy shopping with us.

We try our very best to make sure every customer is completely satisfied. If there's a problem, message us! We're happy to help. Again thank you for shoping with us at electronicstore87.

The item "Swag Off Road Tubing RollerHulk" is in sale since Tuesday, May 11, 2021. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Other Metalworking Equipment".

The seller is "electronicstore87" and is located in Sunnyvale, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Panama, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

  • Color: Does Not Apply
  • Manufacturer: SWAG Offroad
  • Model: Does Not Apply
  • Brand: SWAG Offroad
  • UPC: 7445017831859
  • EAN: 0313114759758
  • MPN: Does Not Apply
  • Batteries Included?: No
  • Material: Black Powder Coated Steel and Cromoly Machined Components
  • Is Discontinued By Manufacturer: No
  • Item Package Quantity: 1
  • Part Number: 6HUKLA

Swag Off Road Tubing RollerHulk    Swag Off Road Tubing RollerHulk